- Hours on the clock 1696
- Canopy ROPS
- Front set of weights
- Cummins 4B engine
- 4ft rockboom
- Slider
- Part worn tyres
Fitted with double stack of weights, water tank, part ROPS & Top cutter 400X ( 320 wide 400 deep)
single stack of weights
backfill blade
ROPS canopy
Tyres - good
Rear mounted full slider
Hours - 1328
single stack of weights
backfill blade
ROPS canopy
Tyres - as new
Rear mounter full slider
Hours - 1771
1,455 hours on the clock
4 good tyres
P95 plow
extended reel carrier kit
single stack of weights
ROPS
- P95 plow
-front mounted reel carrier
-front mounted single stack of weights
-2 post ROPS
Air boss wheels
Hours on the clock 2299
Double stack of weights
Water Tank
2 post ROPS
1354 hours on the clock
Part worn tyres
Double stack of weights
Water tank
2 post ROPS
fitted with a Top cutter x400 (320 depth)
1204 hours on the clock
industrial road tyres
double stack of weights
water tank
This machine can be fitted with a trencher. vibratory plow or Top Cutter
A centre mounted 4 ft trencher which gives a standard 6" cut.
Front-mounted set of weights
Year of manufacture 1995
Hours on the clock - 690
Available with dual wheel kit
Fitted with :
A centre mounted 4 ft trencher which gives a standard 6" cut.
Front-mounted set of weights
Available with dual wheel kit
Trencher - 4ft boom x 6” cut
Rear chain slider,
Front backfill blade,
2300 hrs fully serviced
Fitted with 4 ft trencher attachment.
Double stack of weight
Backfill blade
This tractor has a brand new John Deere engine at 120 hp
Fitted with a front-mounted reel carrier
Fitted with a P95 plow.
Double stack of weights
2 post-ROPS
Quad rubber tracks
Fitted with P95 plow
Front reed carrier
Front-mounted weights
2 post-ROPS
Front fitted water tank
Cuts 900mm deep x 300mm wide
Astec RT960 with P95 plow.
It has a front backfill blade
- 2 post rops
- fitted with a backhoe
- backfill blade
- Part worn tyres
- 3775 hours on the clock
40" rock-saw fitted with 12" segments.
This cuts 1,000mm deep and 300mm wide
We currently have this fitted on to a ASTEC 960, so it is ready to be used as a complete unit.
Case 860 on (diamond latch)
Year of manufacture is 1998 and the hours on the clock is 2,474
This machine is currently fitted with a 4ft deep x 7" wide trencher. The chain has clay cutters fitted.
It has a hydraulic crumber, 2-speed motor.
This machine is fitted with:
- Backfill blade
- Double stack of weights
- Reel carrier
- 3089 hrs on the clock
- Overhead cable trough
- 1/2 worn tyres
- P95 plow
This machine is fitted with the following:
- Backfill blade
- Double stack of weight
- Reel carrier
- 975 hours on the clock
- Good set of tyres
- P95 plow
Stretched Maxi Sneaker with;
- Rear fitted P75 plow
- Front-mounted weights
- Twin wheels
This machine is a very low hour meter reading.
It is fitter with rubber tracks and can be fitted with a 2 f.t or 3 ft boom to meet your requirements.
It is currently set up with a 2ft boom
This machine is a tracked machine and can be fitted with a 3 ft boom to meet your needs.